- Extremely fast setting PVC plastic pipe cement ideal for wet or quick pressurization conditions.
- Cement fades to clear in sunlight.
Box QTY 24
This product can’t be air freighted
Directions
- Cut pipe square and deburr. Clean and dry jointing surfaces.
- Check dry fit. Fitting should go over end of pipe easily but become tight about 1/3 to 2/3 of the way in.
- Use a suitable applicator at least 1/2 the size of the pipe diameter.
- Apply Weld-On Primer if required.
- Apply a full, even layer of cement on the pipe equal to the depth of the socket. Coat the fitting socket.
- Assemble while cement is wet. To avoid pushout, hold for about 30 seconds. Wipe off excess.
- Allow 2 mins for good handling strength and 10 mins cure time.
SKU: PVCGLUE747
FAQ
For best results, use short gentle strokes going from neck to tail avoiding less fur covered areas like the stomach. Carefully adjust pressure based on your pet's tolerance. Be extra careful around bony areas such as hip bones and spine. Always use on a dry coat. Plus you'll get instructions on use delivered with your product.
Not at all! Our PetBrush has been designed with your pet’s comfort in mind. With 51 perfectly sized bristles, the PetBrush massages the skin and coat while removing loose topcoat, dander, dirt, and sand.
Just maneuver the slide back to retract the edges and your pet’s fur, dander, and dirt will come off leaving a clean surface.
The PetBrush was designed with all dog breeds in mind. Due to the adjustable comb, as long as your dog has a fur coat, the PetBrush will be extremely effective. Generally, the longer the coat the more hair the PetBrush® will remove.
Yes, as long as your pet has a coat, the PetBrush will work it's magic and remove loose fur, dirt and undercoat. Be sure to retract the comb suitable to your pets coat.