Description
Spacare Alkalinity & pH Increaser 500g
Increases Total Alkalinity and pH in spa and hot tub water. Water low in Total Alkalinity can corrode equipment, etch some spa surfaces, cause skin and eye irritation in bathers and excessive chlorine usage.
General Instructions:
Total Alkalinity should be maintained between 125ppm – 150ppm. pH should be maintained in the range of 7.2 – 7.6. Ensure your spa water is tested prior to adding Alkalinity & pH Increaser. Specifications
Total Alkalinity & Instructions for dosage:
Add 18gm of Alkalinity & pH Increaser per 1000 litres of water to increase Total Alkalinity by 10 parts per million (ppm)
Directions for use:
1. Calculate the required amount of Alkalinity & pH Increaser (see dosage above)
2. Dissolve in a bucket of water, then pour slowly into the water with the pump & filter operating.
3. Run filter for at least 1 hour.
4. Allow 3-4 hours before re-testing the Alkalinity.
pH Instructions & Directions for use:
1. have the water tested for both Total Alkalinity and pH.
2. Always adjust Total Alkalinity before raising the pH.
3. Calculate the required amount of Alkalinity & pH Increaser
4. Dissolve in a bucket of water, then pour slowly into the water with the pump & filter operating.
5. Run filter for at least 1 hour.
6. Allow 3-4 hours before testing the pH level again.
IMPORTANT NOTES:
If pH has been 6.8 or lower for some time and corrosion of metal fixtures is apparent, seek professional advise before adding Alkalinity & pH Increaser as metal staining may occur.
FAQ
For best results, use short gentle strokes going from neck to tail avoiding less fur covered areas like the stomach. Carefully adjust pressure based on your pet's tolerance. Be extra careful around bony areas such as hip bones and spine. Always use on a dry coat. Plus you'll get instructions on use delivered with your product.
Not at all! Our PetBrush has been designed with your pet’s comfort in mind. With 51 perfectly sized bristles, the PetBrush massages the skin and coat while removing loose topcoat, dander, dirt, and sand.
Just maneuver the slide back to retract the edges and your pet’s fur, dander, and dirt will come off leaving a clean surface.
The PetBrush was designed with all dog breeds in mind. Due to the adjustable comb, as long as your dog has a fur coat, the PetBrush will be extremely effective. Generally, the longer the coat the more hair the PetBrush® will remove.
Yes, as long as your pet has a coat, the PetBrush will work it's magic and remove loose fur, dirt and undercoat. Be sure to retract the comb suitable to your pets coat.