LX AP700V2 spa air blower.
AP series air blowers have a 1" / 25mm threaded union for easy blower loop pipe connection.
Supplied with AMP plug/cord to suit Aeware in.ye or Balboa.
AMP plug on this blower does NOT suit Spanet or Spaquip controllers. An alternate cord with overmoulded plug is required at additional cost or re-use the original cord.
230v, 50Hz, 400w, 3.5A.
700w motor.
285mm long including threaded union, 170mm high, 170mm wide.
*CAUTION - Do not connect the blower after gluing the union to the pipework as glue fumes may enter the blower and will result in an explosion if the motor is started. Best practice is to glue the union to the pipe with blower disconnected. Either connect the blower once it is already running or wait 1hour before screwing the union onto the air blower*
* 1 year parts only warranty on LX blowers
FAQ
For best results, use short gentle strokes going from neck to tail avoiding less fur covered areas like the stomach. Carefully adjust pressure based on your pet's tolerance. Be extra careful around bony areas such as hip bones and spine. Always use on a dry coat. Plus you'll get instructions on use delivered with your product.
Not at all! Our PetBrush has been designed with your pet’s comfort in mind. With 51 perfectly sized bristles, the PetBrush massages the skin and coat while removing loose topcoat, dander, dirt, and sand.
Just maneuver the slide back to retract the edges and your pet’s fur, dander, and dirt will come off leaving a clean surface.
The PetBrush was designed with all dog breeds in mind. Due to the adjustable comb, as long as your dog has a fur coat, the PetBrush will be extremely effective. Generally, the longer the coat the more hair the PetBrush® will remove.
Yes, as long as your pet has a coat, the PetBrush will work it's magic and remove loose fur, dirt and undercoat. Be sure to retract the comb suitable to your pets coat.